Ford Probe FAQ
Ford Probe Forums - Audio
Note: You must be a registered user and logged in to post messages. login | register
Author Topic: Aftermarket Power Antenna...How to wire?
WhiteGT_93 Posted on 2001-11-19 at 19:57:14
I bought an Afteket Metra AW-PW22 Power Antenna that has two wires, The OEM has five wires, how do I wire it to work? So far I have not had any ck to make it work with the radio.
5 Responses
Author Response
Ryan Posted on 2001-11-20 at 03:50:02
what are the wires on the metra antenna labeled as, we know one of them has to be the turn on lead and the other one could possibly be ground, but its hard to say,, because it could be getting ground threw the mounting base or it could just be a positive power source as not to drain directly from the radio anyway just lemme kno what the instructions for your new antenna say the wires are for and ill see what i can do

WhiteGT_93 Posted on 2001-11-20 at 09:44:23
Red wire is for Power, Blue wire is Antenna control. Antenna also has a Black Ground Wire.

ProbeGT Posted on 2001-12-10 at 03:54:30
did you read the faq?

ProbeGT Posted on 2001-12-10 at 03:56:21
i futz with mine fer a week or so. then found that link 10 min and i was putting the molding back in place if you figure out how the get the male to male antena cables together i would love to hear it

JaniceSAdkins Posted on 2009-11-22 at 09:03:33
God love google, great site. Will read up and hopefully have something good to say. Thank you. Janice

JaniceMWarren Posted on 2009-11-23 at 20:55:49
Sure love msn, very cool stuff. Will browse around and hopefully have something I can add. Have a super day. Janice

turn on images to use this navigation bar ©1999 all rights reserved
25 ms